d. L2TP
L2TP Server IP: Enter the Server IP provided by your ISP.
User Name: Enter L2TP username.
Password: Enter L2TP password.
MTU:
Maximum Transmission Unit, you may need to change it for optimal
performance with your specific ISP. 1460 is the default MTU.
Address Mode:
Select Static if your ISP supplies you with the IP address,
subnet mask, and gateway. In most cases, select Dynamic.
IP Address:
Enter the L2TP IP address supplied by your ISP.
Subnet Mask: Enter the Subnet Mask supplied by your ISP.
Default Gateway: Enter the Default Gateway supplied by your ISP.
To Next Page
Loading...
