WDS Settings
WDS (Wireless Distribution System) is used to expand wireless coverage area.
ZSR4134WS provides three modes: Lazy, Bridge and Repeater.
WDS Mode:
Lazy Mode: You need to configure ZSR4134WS’s BSSID into another
device, but don’t need to input another device’s BSSID in ZSR4134WS,
and they will connect together automatically.
Bridge Mode: You can wirelessly connect two or more wired networks
via this mode.
In this mode, you need to add the Wireless MAC address
of the connecting device into ZSR4134WS's AP MAC address table or
select one from the scanning table. At the same time, the connecting
device should be in Lazy, Repeater or Bridge mode.
To Next Page
Loading...
