Installing Your Cable Modem 7
Windows NT/2000 operating systems
1
Windows NT:
From the Windows desktop, click Start | Programs
| Command Prompt.
Windows 2000:
From the Windows desktop, click Start | Programs
| Accessories | Command Prompt.
2
In the Command Prompt window, type
ipconfig [space] /all
and press Enter.
3
In the next Command Prompt window, under Ethernet
Adapter, locate the Physical Address and make a note of it.
It’s a good idea to enter it in the Reference Information
section at the back of this manual.
4
Click the Close box to return to Windows.
To Next Page
Loading...
