Installing Your Cable Modem 9
Windows 95/98/Me Network Settings
To configure network settings on a computer running Windows
95/98/Me, follow these steps.
Note: The dialog boxes shown are representative of a typical
computer. What you see on your computer may differ
slightly.
1
From the Windows desktop, click Start | Settings | Control
Panel, and then double-click the Network icon. The
Network dialog box appears.
Click the Configuration tab. A list of installed network
components is displayed. If you see a line that includes
TCP/IP (Transmission Control Protocol/Internet Protocol),
skip to Step 5. If you don’t see that line, continue with Step 2.
2
In the Network dialog box, if TCP/IP is not listed, click the
Add button.
To Next Page
Loading...
