Installing Your Cable Modem 13
9
The Network dialog box from Step 1 is displayed again.
Make sure TCP/IP is highlighted, and click OK to enable
your settings.
10
If prompted, restart the computer.
You have configured your Windows 95/98/Me network settings
successfully. Now turn to Making the Connections on page 21.
Windows NT 4.0 Network Settings
Note: The information shown in your dialog boxes may differ
from the examples.
1
On the desktop, click Start | Settings | Control Panel, and
then double-click the Network icon.
2
In the Network dialog box, click the Protocols tab to view
the Network Protocols list.
If you see a line that includes TCP/IP Protocol
(Transmission Control Protocol/Internet Protocol), skip to
Step 5. Otherwise, continue with Step 3.
To Next Page
Loading...
