Hardware Connection
DESCRIPTION
LAN 1-4
(Gigabit Ethernet 1-4)
Four 10/100/1000 auto-sensing Ethernet ports for computers
and other devices that have an Ethernet port.
RESET
Press and hold this recessed button at least 8 seconds in the
unlikely event that you want to restore the default factory
settings. This button is recessed to prevent accidental resets of
your cable modem/router.
RF / Cable
Connect your coaxial cable line to this port.
POWER
Connect the supplied power cube to this port.
ON/OFF SWITCH
Powers the cable modem/router on or off.
Connecting Model 5352 wirelessly to some device
A Wi-Fi compatible computer, smartphone, game station, or other device can access the Internet
wirelessly through your Cable Modem/Router. You can connect up to 253 devices wirelessly. To make
the wireless connection, follow these steps:
1 First locate the wireless connection setup on your device, and then select the cable modem/router
network with the same name as the SSID name on the bottom of your cable modem/router.
2 Next you will be prompted to enter the Security Key or Password for your wireless network. The
WPA/WPA2 security key is printed on the bottom label of your cable modem/router and is unique to
you.
To Next Page
Loading...
