10
Using the tuner
Use this to tune the connected instrument.
1.
Activate the tuner.
• Press
and at the same
time.
To close the tuner, press or .
2.
Tune the instrument.
• Play the sound that you want to tune
and adjust its pitch.
The nearest note name and pitch detuning
will be shown on the display and by the LEDs.
When the pitch is accurate, the LED at the
center of the meter will light green and the
LEDs to the left and right will light red.
Setting the tuner
• Turn and to set whether the sound is output
while tuning (BYPASS/MUTE) and the standard pitch.
• Press to open the SETTING screen where you
can set the tuner type and drop tunings.
Flat In tune Sharp
1
2
Pitch detuning
Nearest note
Instrument
sound output
Standard
pitch
To Next Page
Loading...
