Need help?Do you have a question about the Zoom Handy Recorder H4 and is the answer not in the manual?
General| Audio Formats | WAV, MP3 |
|---|---|
| Simultaneous Recording Tracks | 4 |
| Maximum SPL | 140 dB |
| Sampling Rate | 44.1 kHz, 48 kHz, 96 kHz |
| Bit Depth | 16-bit, 24-bit |
| Display | LCD |
| Battery Life | Up to 6 hours |
| Built-In Microphone | Stereo |
| Input Connectors | 2 x XLR/TRS combo |
| Output Connectors | 1 x 3.5mm stereo mini jack |
| Recording Resolution | 16-bit/24-bit |
| Storage Media | SD/SDHC card |
| Power Source | 2 x AA batteries or USB power |
| Max Recording Time | Varies with SD card size and format |
Details on powering the device using AC adapter or batteries, including safety warnings.
Precautions regarding operating conditions like temperature, humidity, dust, and vibration.
Instructions for safe physical interaction, avoiding liquids, pressure, and drops.
Instructions for connecting external devices to input/output jacks.
Discourages modifying the product, as it can result in damage or safety hazards.
Warning about using loud volumes to prevent hearing impairment.
Describes the compact design and integrated functions of the H4.
Highlights applications from field recording to multi-track use.
Explains merging tracks into a stereo or mono file.
Features PREAMP and EFX modules for sound processing.
Functions as an audio interface or SD card reader via USB.
Provides built-in tools for practice and tuning.
Compares the two main operational modes of the H4.
Details on recording two signals into a stereo file.
Explains the multi-track recording capabilities.
Describes the effect module setup in stereo mode.
Describes the effect module setup in 4-track mode.
Identifies controls and ports on the left side of the H4.
Identifies controls and the display on the top panel.
Identifies input/output ports on the rear panel.
Details connections for monitoring audio via the H4's side panel.
Details connections for mics, guitars, and keyboards via rear panel.
Requirements, insertion, and handling procedures for SD cards.
Step-by-step procedures for turning the device on and off.
Guidance on microphone placement and sound source positioning.
Initial procedure to start recording using the built-in stereo mic.
Choosing between WAV or MP3 format and sampling rates.
Explains the settings for the mic gain switch for input sensitivity.
Steps to prepare the H4 and monitor system for recording.
Procedure for powering on and verifying the stereo mode.
Optimizing input signal levels for high-quality recording.
Explains the functions of the MENU key and its navigation.
Navigating and setting input parameters within the menu.
Enabling the automatic recording level adjustment.
Applying built-in effects like compressor and limiter.
Configuring the compressor and limiter effect modules.
Configuring microphone simulation effects.
Steps for starting, stopping, and monitoring recording.
How to choose recorded files from the STEREO folder for playback.
Initial setup for 4-track recording, including mode selection.
Procedure to change the H4's mode to 4-track recording.
Steps to create and name a new project for organizing recordings.
Configuring metronome tempo, sound, pattern, and volume.
Guidance on recording the initial track in a 4-track project.
Choosing audio inputs and specific tracks for recording.
Setting optimal input sensitivity and recording levels for each track.
Choosing and applying pre-programmed effect patches.
Modifying existing effect patches and their parameters.
Explains the functions of the MENU key in 4-track mode.
Steps for recording and checking recorded content in 4-track mode.
Recording subsequent tracks while monitoring previous ones.
Detailed steps for recording the initial track with settings.
Combining recorded tracks into a final stereo mixdown.
Adjusting volume and panning for individual tracks.
Creating the final stereo file by mixing down tracks.
Basic explanation of stereo recording and its capabilities.
Procedure to change the H4's mode to stereo recording.
Steps for performing a stereo recording session.
Choosing audio inputs like built-in mic or external jacks.
Optimizing input signal levels for optimal recording quality.
Adjusting input sensitivity using gain switches.
Using the display screen for adjusting recording levels.
Enabling and using the auto gain feature for recording levels.
Screen for selecting WAV or MP3 recording formats.
Choosing file format, sampling rate, and bit rate.
Steps for starting, stopping, and monitoring stereo recordings.
Enabling and using the input signal monitoring feature.
How to play back recorded stereo files.
Choosing files from the STEREO folder for playback.
Navigating to specific time points within an audio recording.
Looping playback of a selected audio segment between two points.
Overview of the H4's multi-track recording capabilities.
Procedure to change the H4's operational mode to 4-track.
Choosing between Overwrite and Always New recording modes.
Explanation of Overwrite and Always New recording modes.
How recording steps differ based on the selected mode.
Steps for performing recording in Overwrite mode.
Steps for performing recording in Always New mode.
How to operate the recorder functions in 4-track mode.
Assigning recorded files to specific tracks for playback.
Using locate and A-B repeat features in 4-track mode.
Overwriting specific sections of a previously recorded track.
Performing punch-in/out operations manually.
Automating punch-in/out operations by setting points beforehand.
Merging multiple recorded tracks into a single stereo file.
Explanation of how to use the mixer in 4-track mode.
Details on the input mixer and track mixer.
Choosing input signals to assign to the mixer.
Setting recording levels for signals supplied to the mixer.
Choosing specific tracks for recording.
Enabling stereo link for track pairs for stereo output.
Monitoring input signals in 4-track mode.
Adjusting track levels and stereo balance for mixing.
Enabling stereo link for track pairs (1/2 or 3/4).
Definition and components of a project in 4-track mode.
Common operations for managing projects like select, rename, copy.
Write-protecting selected projects to prevent changes.
Steps to create and name a new project.
How to load projects from the SD card.
Procedure for renaming existing projects.
Duplicating a selected project to a free project number.
Removing projects from the SD card.
Preventing accidental changes or deletion of projects.
Introduction to the tuner's capabilities and usage.
Steps for using the chromatic tuner to detect notes.
How to use alternative tuner modes like guitar and bass tuning.
Introduction to the built-in effect section and its modules.
Effect module setup and signal flow in stereo mode.
Effect module setup and signal flow in 4-track mode.
How to apply effects to audio signals in stereo mode.
Configuring compressor and limiter effect modules.
Configuring microphone simulation effects.
How to apply effects to audio signals in 4-track mode.
Choosing and applying pre-programmed effect patches.
Modifying existing effect patches and their parameters.
Storing customized effect patches to memory.
Procedure for renaming effect patches.
Loading effect patches from other projects.
Explanation of where recorded files are saved on the SD card.
General procedures for managing recorded files.
Procedure for changing the names of recorded files.
Removing recorded files from the SD card.
Duplicating recorded files within the same project.
Loading recorded files from other projects or stereo mode.
Viewing file sizes and recording times of recorded files.
Configuring metronome parameters like tempo, sound, and volume.
Adjusting screen contrast and backlight settings.
Enabling or disabling phantom power for microphone inputs.
Locking controls to prevent accidental operation during recording.
Connecting the H4 to a computer via USB.
Using the H4 with computer software as an audio interface.
Accessing the SD card inserted in the H4 from a computer.
Overview of various SD card management functions.
Viewing the remaining capacity of the SD card.
Formatting the SD card to prepare it for use.
Information regarding system software updates.
Details on tracks, recording time, projects, and functions.
Specifications for the number of effect modules and types.
Details on metronome beat, tempo, sound, and pattern settings.
Specifications for analog-to-digital and digital-to-analog conversion.
Supported recording media and data formats (WAV, MP3).
Details on input connector types, impedance, and levels.
Specifications for phantom power voltage options.
Specifications for master and headphone outputs.
Specifications for USB connectivity and power requirements.
Battery type and continuous recording/playback time.
Solutions for common recording and playback issues.
Solutions for issues with effects, tuner, USB, and card protection.
Overview of effects usable in 4-track mode and their parameters.
Details on guitar and bass preamp effect types and parameters.
Specific types and parameters for bass preamp effects.
Specific types and parameters for mic preamp effects.
Parameters for RACK COMP and LIMITER effects.
Parameters for AUTO WAH and PHASER effects.
Parameters for TREMOLO and RING MOD effects.
Parameters for SLOW ATK and CHORUS effects.
Parameters for the FLANGER effect.
Parameters for STEP, VIBE, CRY, and PITCH effects.
Parameters for AIR, DELAY, RVS DELAY, and HALL effects.
Available effect types that can be selected in stereo mode.
Microphone simulation types available in stereo mode.
Compressor and Limiter types available in stereo mode.
List of effect patches categorized for guitar.
List of effect patches categorized for bass.
List of effect patches categorized for microphone.
Information on the folder structure of the SD card.
To Next Page
