EasyManuals Logo

Zoom Handy Recorder H4 User Manual

Zoom Handy Recorder H4
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
Effect Types and Parameters
ZOOM H4
94
Delay/reverb effect types
AIR
This effect lends spatial depth to the sound by reproducing the ambient
atmosphere of a room.
(1) SIZE
1 – 100
(2) REFLEX
0 – 10
Adjusts the size of the simulated space. Adjusts the amount of wall reflections.
(3) TONE
0 – 10
(4) MIX
0 – 100
Adjusts the tone.
Adjusts the level of effect sound mixed to the original
sound.
DELAY
This a long delay of up to 5000 milliseconds.
ECHO
This simulates a tape echo with a long delay time of up to 5000
milliseconds.
ANALOG
This simulates a warm-sounding analog delay with a long delay time of up
to 5000 milliseconds.
The above 3 effect types have the same parameters.
(1) TIME
1 – 5000ms,
(See Table on page 93)
(2) FEEDBACK
0 – 100
Adjusts the delay time. Adjusts the feedback amount.
(3) HIDAMP
0 – 10
(4) MIX
0 – 100
Adjusts the delay sound damping characteristics in the
high frequency range.
Adjusts the level of effect sound mixed to the original
sound.
RVS DELAY
This is a reverse delay with a long delay time of up to 2500 milliseconds.
(1) TIME
10 – 2500ms,
(See Table on page 93)
(2) FEEDBACK
0 – 100
Adjusts the delay time. Adjusts the feedback amount.
(3)HIDAMP
0 – 10
(4) BALANCE
0 –100
Adjusts the delay sound damping characteristics in the
high frequency range.
Adjusts the balance between original sound and effect
sound.
HALL
This reverb effect simulates the acoustics of a concert hall.
ROOM
This reverb effect simulates the acoustics of a room.
SPRING
This effect simulates a spring reverb.
ARENA
This effect simulates a large venue such as an arena.
T ROOM
This effect simulates the acoustics of a tiled room.
M SPRING
This effect simulates a bright and clear sounding spring reverb.
The above 6 effect types have the same parameters.
(1) DECAY
1 – 30
(2) PRE DELAY
1 – 100
Adjusts the reverb duration.
Adjusts the delay between the original sound and the
start of the reverb sound.
(3)TONE
0 – 10
(4) MIX
0 – 100
Adjusts the tone.
Adjusts the level of effect sound mixed to the original
sound.
H4_E.book 94 ページ 2006年9月1日 金曜日 午後7時56分

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zoom Handy Recorder H4 and is the answer not in the manual?

Zoom Handy Recorder H4 Specifications

General IconGeneral
BrandZoom
ModelHandy Recorder H4
CategoryRecording Equipment
LanguageEnglish

Related product manuals