4-Track Mode
ZOOM H4
41
Selecting the recording mode
This section explains how to select the recording
mode.
HINT
The recording mode setting is saved separately
for each project.
1.
Verify that the recorder is stopped
and press the center of the [MENU]
key at the top screen.
The main menu for making various settings
appears.
2.
Move the jog dial up/down to bring
the cursor to "REC MODE". Then
press the jog dial.
The REC MODE SELECT screen appears.
3.
To change the recording mode, move
the jog dial up/down to display
"OVER WRITE" or "ALWAYS NEW".
The displayed mode is selected.
4.
To return to the 4-track mode top
screen, press the center of the
[MENU] key.
Operation differences according to
recording mode
The recording operation steps differ according to
the currently selected recording mode.
◆
Recording in Overwrite mode
1.
At the 4-track mode top screen,
press one of the TRACK [1] – [4] keys
repeatedly until the key is lit in red, to
select the track on which to record.
2.
To start recording, press the [REC]
key so that the key lights up (unit is in
recording standby condition). Then
press the top (@
) of the [MENU] key.
Recording begins.
HINT
It is also possible to first press the top (@
) of the
[MENU] key to start playback and then press the
[REC] key at the point where you want recording
to start. This method is convenient to perform
manual punch-in.
3.
To stop recording, press the [REC]
key once more, or press the top (@
)
of the [MENU] key.
Recording stops. If you have used the [REC]
key, the unit continues in playback mode.
◆
Recording in Always New mode
1.
At the 4-track mode top screen,
press one of the TRACK [1] – [4] keys
repeatedly until the key is lit in red, to
select the track on which to record.
2.
To start recording, press the [REC]
key so that the key lights up (unit is in
recording standby condition), and
then press the [REC] key once more.
H4_E.book 41 ページ ２００６年９月１日 金曜日 午後７時５６分
To Next Page
Loading...
Need help?
General
