EasyManua.ls Logo

Zoom HD16 User Manual

Zoom HD16
213 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© ZOOM Corporation
Reproduction of this manual, in whole or in part, by any means,
is prohibited.
Operation Manual
English

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Zoom HD16 and is the answer not in the manual?

Zoom HD16 Specifications

General IconGeneral
Tracks16
Simultaneous Recording Tracks8
Phantom PowerYes
Built-in EffectsYes
USBYes
Simultaneous Playback Tracks16
Sampling Frequency44.1kHz
A/D Conversion24-bit
D/A Conversion24-bit
Recording FormatWAV
Built-in Rhythm PatternsYes
USB Audio InterfaceYes
SD Card SlotNo
Input Channels8
Output Channels2
LCD DisplayYes
TypeMultitrack Recorder
EffectsYes
Headphone OutputYes
Inputs8 XLR/TRS combo inputs

Summary

Usage and Safety Precautions

Safety Precautions

Explains safety symbols and provides essential safety tips for hazard-free use of the HD8/HD16.

Usage Precautions

Covers precautions related to electrical interference, cleaning, data backup, and copyright law.

Introduction

Overview

Provides a general introduction to the HD8/HD16 Hard Disk Recorder and manual.

Features of the HD8/HD16

Highlights the key features and capabilities of the HD8/HD16 for music production.

Getting to Know the HD8/HD16

Recorder Section Overview

Describes the recorder section, including tracks, V-takes, and the master track.

Rhythm Section Overview

Explains the rhythm section's accompaniment patterns and sound generator capabilities.

Mixer Overview

Details the mixer's function in processing and blending signals from various sources.

Effects Overview

Introduces the two types of effects: insert and send/return effects.

CD-R/RW Drive Overview

Explains the CD-R/RW drive's role in creating audio CDs and backups.

Names of Parts

HD8 Top Panel Controls

Identifies and describes the controls on the top panel of the HD8.

HD16 Top Panel Controls

Identifies and describes the controls on the top panel of the HD16.

Rear Panel Connections

Details the various input/output jacks and connectors on the rear panel.

Right Side Panel

Highlights the controls and features on the right side panel.

Connections

Connecting Instruments and Microphones

Explains how to connect guitars, basses, and microphones to the unit.

Connecting Stereo and Monitor Equipment

Details connections for stereo devices, monitor systems, and MIDI/USB interfaces.

Installing the CD-R/RW Drive

Power On/Off

Turning Power On

Step-by-step guide for powering up the HD8/HD16 and connected equipment.

Turning Power Off (Shutdown)

Procedure for safely powering down the HD8/HD16 and connected devices.

Listening to a Demo Song

Selecting the Demo Song

Instructions on how to load a demo song project from the hard disk.

Playing the Demo Song

Steps for playing the loaded demo song and adjusting its volume.

Quick Tour

Step 1: Preparations

Covers creating a new project, selecting a guide rhythm, and initial setup.

Step 2: Recording the First Track

Guides through recording the initial track with insert effect.

Step 3: Overdubbing

Explains how to record additional tracks while listening to existing ones.

Step 4: Mixing

Details adjusting track levels, panning, EQ, and effects for mixdown.

Step 5: Mixdown

Covers the final mixdown process onto the master track.

Reference [Recorder]

V-takes Management

Explains V-takes for track recording and switching between them.

Changing V-take Names

Instructions on how to rename V-takes for better organization.

Song Navigation Functions

Covers locating points and A-B repeat for song playback control.

Scrub/Preview and Punch-in/out

Details scrub/preview for precise location finding and punch-in/out for re-recording.

Master Track Recording (Mixdown)

Explains recording mixdowns onto the master track for final output.

Master Track Operations

Covers mixdown steps, master track playback, and WAV file conversion.

Bounce Function for Track Combining

Explains mixing multiple tracks onto fewer tracks using the bounce function.

Rhythm Recording to Audio Tracks

Guides on recording drum/bass sounds onto audio tracks.

8-Track Recording Mode (HD16 Only)

Details the HD16's capability for simultaneous 8-track recording.

Marker Function for Song Navigation

Explains setting, locating, and deleting marks for song navigation.

Pre-count Operation Settings

Covers adjusting the number of pre-count beats and volume.

Reference [Track Editing]

Editing a Range of Data

Provides basic steps for editing specific data ranges like copy, move, erase, trim.

Copying a Specified Range of Data

Detailed steps for copying a selected audio data range to another track/V-take.

Moving a Specified Range of Data

Instructions for moving audio data within a track or to another V-take.

Erasing a Specified Range of Data

Steps to erase audio data within a specified range, returning it to mute condition.

Trimming and Fade Operations

Covers trimming data ranges and applying fade-in/fade-out effects.

Reversing Audio Data

Explains how to reverse a specified range of audio data.

Changing Audio Duration and Pitch

Details time stretch/compress and pitch fix for audio data.

Harmony Generation

Guides on creating 3-part and 1-part harmonies using audio data.

V-take Editing Basics

Covers basic operations for editing V-takes like erase, copy, move, and exchange.

Importing Audio Data

Explains importing audio data from various sources into V-takes.

Track Capture and Swap

Details capturing track data for backup and swapping with current data.

Reference [Phrase Looping]

Phrase Usage Overview

Explains how phrases are used for looping, sequencing, and creating rhythm tracks.

Loading Phrases into the Phrase Pool

Covers loading phrases from projects, CD-ROM, or WAV/AIFF folders.

Phrase Loop Creation

Details using FAST input to write phrase loops to tracks/V-takes.

Reference [Mixer]

Mixer Overview

Describes the input mixer and track mixer sections of the HD8/HD16.

Assigning Input Signals to Tracks

Explains how to adjust input sensitivity and send signals to recorder tracks.

Adjusting Track Parameters

Guides on adjusting parameters like volume, panning, EQ, and effects per track.

Using Parameter Knobs

Explains quick adjustment of main track parameters using panel knobs.

Linking Tracks for Stereo

Details how to link adjacent mono tracks for stereo operation.

STEREO SUB-OUT Jack Configuration

Describes using the SUB-OUT jack for separate mixes or effect sends.

Using the Solo Function

Explains how to isolate and monitor individual tracks during playback.

Saving and Recalling Mixer Settings (Scene Function)

Covers saving, recalling, and automating mixer settings using scenes.

Reference [Rhythm]

Rhythm Section Overview

Explains the rhythm section's drum kits, bass programs, and patterns.

Rhythm Song and Pattern Modes

Describes the two operating modes: rhythm pattern and rhythm song.

Playing and Editing Rhythm Patterns

Covers playing patterns, changing tempo, and adjusting drum/bass sounds.

Creating Original Rhythm Patterns

Details real-time and step input methods for creating custom rhythm patterns.

Editing Rhythm Section Settings

Covers adjusting metronome, pad sensitivity, and memory status.

Reference [Effects]

Effects Overview

Introduces insert and send/return effects and their characteristics.

Using the Insert Effect

Explains selecting insert effect position, patches, and editing modules.

Using the Send/Return Effect

Details selecting and editing reverb and chorus/delay effect patches.

Storing and Swapping Effect Patches

Covers saving edited patches and interchanging patch positions.

Importing Effect Patches from Another Project

Explains importing insert or send/return effect patches from other projects.

Reference [Creating a CD]

About Audio CD Creation

Discusses creating audio CDs and the features of CD-R and CD-RW discs.

Creating an Audio CD

Guides on creating an audio CD by project or by album.

Marker Function for Track Separation

Explains using markers for track division during CD creation.

Including Playlists in Albums

Describes how to incorporate playlist information into album creation.

Playing an Audio CD

Instructions for playing audio CDs inserted into the drive.

CD Finalization and Erasing

Covers finalizing CD-R/RW discs and erasing CD-RW discs.

Loading Audio CD Tracks into Projects

Explains how to import audio tracks from CDs into the recorder.

Backup and Restore Operations

Details backing up projects to CD-R/RW and restoring them.

Reference [Projects]

About Projects

Defines projects and lists the information they contain.

Project Operations

Covers basic operations like selecting, creating, copying, erasing, and naming projects.

Loading Projects

Instructions for loading saved projects from the internal hard disk.

Creating New Projects

Step-by-step guide for creating a new project and naming it.

Project Size and Disk Capacity

Explains how to check project size and available disk space.

Duplicating and Erasing Projects

Details copying and deleting specified projects from the hard disk.

Changing Project Name and Protection

Covers editing project names and enabling/disabling write protection.

Reference [MIDI]

About MIDI

Explains MIDI basics and the HD8/HD16's MIDI capabilities.

MIDI Functions

Details using MIDI for playing, sync, control changes, and SMF playback.

Making MIDI-Related Settings

Covers setting MIDI channels, clock transmission, and other MIDI functions.

Selecting MIDI Ports

Explains choosing between USB and MIDI IN/OUT connectors for MIDI communication.

Using the SMF Player

Guides on reading SMF files and selecting SMF output destinations.

SMF Playback

Details how to play imported SMF files and set playback options.

Reference [USB]

USB Port Functions

Explains using the USB port for file transfer, DAW control, and MIDI.

File Transfer to/from Computer

Describes switching to mass storage mode and transferring files via USB.

Operating DAW Software via USB

Covers selecting connectors and switching to control surface mode.

Simultaneous Mass Storage and Control Surface Mode

Explains using mass storage and control surface modes simultaneously.

Reference [Other Functions]

Sequence Playback of Multiple Projects

Guides on creating playlists for continuous playback of multiple projects.

Using the Tuner Function

Explains using the chromatic and other tuner types for pitch adjustment.

Changing Foot Switch Functionality

Details reassigning the foot switch for play/stop or punch-in/out control.

Preventing Digital Copying

Covers preventing third-generation digital copies from master discs/tapes.

Switching Level Meter Display

Explains changing the level meter to display pre- or post-fader signals.

Adjusting Display Contrast

Covers adjusting the contrast setting of the unit's display.

Checking System Version

Instructions for viewing the current system software version.

Hard Disk Maintenance

Covers basic maintenance like initializing and scanning the hard disk.

Troubleshooting

Problems During Playback

Addresses issues like no sound, weak sound, or non-responsive playback.

Problems During Recording

Covers recording issues like inability to record or distorted sound.

Problems with Effects

Troubleshoots insert and send/return effects not working or sounding incorrectly.

Problems with the Rhythm Section

Addresses issues with rhythm pattern/song playback and pad sounds.

Problems with MIDI

Covers MIDI connection, synchronization, and sound playback issues.

Problems with CD-R/RW Drive

Troubleshoots issues related to CD playback, writing, backup, and file reading.

Other Problems

Addresses general issues like project creation errors and disk space limitations.

Appendix

Effect Parameters

Details parameters for various insert effect modules like COMP/LIMITER, EFX, PREAMP.

MOD/DELAY and ZNR Modules

Lists parameters for MOD/DELAY, ZNR, Volume Pedal, and MIC PRE modules.

Algorithm Effect Modules

Details effect modules within algorithms like BASS, 3Band EQ, and COMP/LIMITER.

Effect Patch Lists

Provides comprehensive lists of available patches for CLEAN and DISTORTION algorithms.

Rhythm Pattern List

Lists all available rhythm patterns with names and measures.

Instrument Lists

Catalogues available drum kits, bass programs, and instrument categories.

MIDI Implementation Chart

Details MIDI messages transmitted and recognized by the HD8/HD16.

Related product manuals