USAGE AND SAFETY PRECAUTIONS
ZOOM HD8/HD16
3
• Electrical interference
For safety considerations, the HD8/HD16 has been designed to
provide maximum protection against the emission of
electromagnetic radiation from inside the device, and
protection from external interference. However, equipment
that is very susceptible to interference or that emits powerful
electromagnetic waves should not be placed near the HD8/
HD16, as the possibility of interference cannot be ruled out
entirely.
With any type of digital control device, the HD8/HD16
included, electromagnetic interference can cause
malfunctioning and can corrupt or destroy data. Care should be
taken to minimize the risk of damage.
• Cleaning
Use a soft, dry cloth to clean the HD8/HD16. If necessary,
slightly moisten the cloth. Do not use abrasive cleanser, wax,
or solvents (such as paint thinner or cleaning alcohol), since
these may dull the finish or damage the surface.
• Backup
The data of HD8/HD16 can be lost because of malfunction or
incorrect operation. Backup your data.
• Copyrights
Except for personal use, unauthorized recording from
copyrighted sources (CDs, records, tapes, video clips,
broadcast material and so on) is prohibited.
ZOOM Corporation does not bear any liability for injunctions
regarding the copyright law infringement.
Please keep this manual in a convenient place for future
reference.
MIDI is a registered trademark of Association of Musical
Electronics Industry (AMEI).
All other trademarks and registered trademarks are the
property of their respective owners.
All trademarks and registered trademarks mentioned in this
manual are for identification purposes only and are not
intended to infringe on the copyrighted properties of their
respective owners.
Usage Precautions
To Next Page
Loading...
Need help?
General
