EasyManuals Logo

Zoom HD16 User Manual

Zoom HD16
213 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Quick Tour
ZOOM HD8/HD16
35
6. While playing the song, turn the dial to select
the patch.
You can edit the patch to modify the effect further ( p. 130).
NOTE
If the signal sounds distorted when the mastering effect is
applied, make sure that there is no distortion in the playback
sound of individual tracks, and lower all fader settings as
necessary.
7. When you have verified that the sound is as
desired, press the [EXIT] key.
The unit returns to the main screen.
After mastering effect settings have been completed, record
the final mix on the master track.
1. Press the ZERO [U] key to return to the
beginning of the song.
2. Press the PLAY [R] key to play the song, and
check the level after the [MASTER] fader.
The signal level after the [MASTER] fader can be checked by
observing the [MASTER] level meter. If the 0 dB segment
lights up during play, turn down the [MASTER] fader to
perform fine adjustment.
After checking the level, press the STOP [P] key.
3. Repeatedly press the [MASTER] status key
so that the key lights up in red.
The master track can now be recorded.
4. Move again to the recorder start position.
Then hold down the REC [O] key and press
the PLAY [R] key.
Recording on the master track starts. The playback level of
each track and the master track recording level are shown on
the level meters.
5. When recording is completed, press the
STOP [P] key.
6. To play the master track, repeatedly press the
[MASTER] status key until it is lit in green.
While the [MASTER] status key is lit in green, the master track
can be played. All other status keys go out and the signals from
other tracks are muted. The insert and send/return effects are
also disabled.
7. Return to the beginning of the song, and
press the PLAY [R] key.
The master track is played back. To stop playback, press the
STOP [P] key.
8. To return the HD8/HD16 to normal operation,
repeatedly press the [MASTER] status key
until it is out.
Muting of other tracks is canceled, and the status keys revert to
the original condition.
HINT
Like the other tracks, the master track also has 10 V-takes.
•You can play the master tracks of multiple projects in succession
( p. 165).
The contents of the master track can be edited later ( p. 50).
5.2 Mixdown on the master
track
MASTERING
MASTERING
No.0:PlusAlfa
No.0:PlusAlfa

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zoom HD16 and is the answer not in the manual?

Zoom HD16 Specifications

General IconGeneral
Tracks16
Simultaneous Recording Tracks8
Phantom PowerYes
Built-in EffectsYes
USBYes
Simultaneous Playback Tracks16
Sampling Frequency44.1kHz
A/D Conversion24-bit
D/A Conversion24-bit
Recording FormatWAV
Built-in Rhythm PatternsYes
USB Audio InterfaceYes
SD Card SlotNo
Input Channels8
Output Channels2
LCD DisplayYes
TypeMultitrack Recorder
EffectsYes
Headphone OutputYes
Inputs8 XLR/TRS combo inputs

Related product manuals