Reference [Creating a CD]
ZOOM HD8/HD16
143
The HD8/HD16 lets you register the master tracks of multiple
projects in a list (playlist) for continuous playback in a
sequence (→ p. 165). It is possible to include playlist
information when creating an audio CD by album.
HINT
You can create up to ten playlists, but only one can be included
in an album.
1. Perform steps 1 – 7 of “Creating an audio CD
by album”, and bring up the album screen on
the display.
2. Press the [PROJECT/UTILITY] key in the
control section.
The display indication changes as follows. In this condition,
you can select the playlist (1 – 10) to include in the album.
3. Turn the dial to select the playlist, and press
the [ENTER] key.
The indication “Import?” appears on the second line of the
display.
4. To import the playlist information, press the
[ENTER] key.
The procedure is carried out, and the album screen returns.
HINT
After importing playlist information, you can edit the album as
normal.
To play an audio CD inserted in the CD-R/CD-RW drive,
proceed as follows. This method can also be used to audition a
CD-R/CD-RW disc which has not been finalized yet.
NOTE
•A CD-R/CD-RW disc which has not been finalized can only be
played with this method.
• Mixed-mode CDs or copy-controlled CDs cannot be played.
1. Insert an audio CD into the integrated CD-R/
RW drive.
2. From the main screen, hold down the [SHIFT]
key and press pad 1 (CD-R/RW).
The menu for various CD-R/RW functions appears.
3. Verify that “AUDIO CD” is shown on the
second line of the display, and press the
[ENTER] key.
The display indication changes as follows.
4. Use the cursor left/right keys to bring up the
indication “PLAYER” on the second line of
the display, and press the [ENTER] key.
The CD player screen for audio CD playback appears. The
second line of the display shows the track number and current
position (minutes/seconds) for the inserted audio CD. If a non-
finalized CD-R/RW disc is inserted, a “✽” symbol is shown on
the first line of the display.
5. Use the REW [T] and FF [Y] keys in the
transport section to select the track to be
played.
The FF [Y] key selects the next track and the REW [T] key
selects the previous track.
6. To start playback of the audio CD, press the
Including a playlist in an album
Track1
End of Album
Playlist number
Import Playlist
List1
List1
Import?
Playing an audio CD
AUDIO CD 1/5
>BURN CD
Player *
Track1 00:00
When a "✽" symbol is shown here, a non-finalized CD-R/RW
disc is inserted.
Finalize status
The number of the currently selected track on the audio CD is
shown.
Track number
To Next Page
Loading...
Need help?
General
