Need help?Do you have a question about the Zoom H2next and is the answer not in the manual?
General| Audio Formats | WAV, MP3 |
|---|---|
| Sample Rates | 44.1 kHz, 48 kHz, 96 kHz |
| Battery Life | Up to 20 hours |
| Storage | SD/SDHC card (up to 32GB) |
| Recorder Type | Portable handheld recorder |
| Simultaneous Recording Tracks | 4 tracks |
| A/D Resolution | 24-bit |
| Built-in Speaker | Yes |
| Max Channels | 4 channels |
| Battery | 2 x AA |
| Bluetooth | No |
| Microphone Type | XY stereo and MS stereo |
| Bit Depth | 16-bit, 24-bit |
| Inputs | 2 x XLR/TRS combo inputs |
| Outputs | 3.5mm stereo line/headphone out |
| Memory (Internal) | No |
| USB | USB 2.0 |
| Power | 2 x AA batteries |
| Display | LCD |
| Headphone Output | 3.5mm stereo jack |
Details the meaning of warning, caution, and other symbols used in the manual.
Covers safe operation with AC adapters and batteries, including handling precautions.
Guidelines for product handling, operating environment, and preventing damage.
Includes notes on alterations, connecting cables, volume usage, and interference.
Instructions for cleaning the unit and handling malfunctions.
Lists trademarks and copyright information for software and technologies used.
Highlights the main features like 360° recording, stereo width control, and long battery life.
Details its use as an SD card reader, audio interface, and built-in tuner/metronome.
Identifies ports and controls on the left side of the H2n.
Details the speaker, recording indicator, and record button on the front.
Locates the menu, playback, and gain controls on the right side.
Shows indicators, dials, battery cover, and mounting sockets.
Explains indicators for recording mode, battery, levels, and file status.
Details indicators for playback time, file name, speed, and levels.
Instructions for powering the device using batteries or an AC adapter.
Step-by-step guide for inserting and preparing an SD card.
Procedures for powering the H2n unit on and off.
How to enable and disable the hold function to prevent accidental operations.
Guide to connecting external mics, including plug-in power usage.
Instructions for setting the device's date and time for file tagging.
How to set the battery type for accurate charge indication.
Details the MS stereo mode for capturing wide stereo images.
Explains the XY stereo mode for natural, deep sound imaging.
Covers 2ch and 4ch surround modes for multi-directional audio capture.
Guide to selecting and adjusting recording modes like MS-RAW.
How to adjust the stereo width before recording in specific modes.
Instructions for choosing folders to save recordings.
Step-by-step guide for starting, marking, and stopping manual recordings.
How to configure the recorder to start/stop based on input levels.
Utilizing pre-recording to capture audio before manual start.
Using the metronome for a count-in sound before recording.
Basic steps to play recorded files and navigate through them.
How to choose specific files for playback from a list.
Adjusting the playback speed between 50% and 150%.
Setting start and stop points for looping a specific interval.
Selecting playback behaviors like play all, play one, repeat one, repeat all.
Changing the pitch of playback without altering speed.
Adjusting the stereo width of MS-RAW files after recording.
Adjusting levels and panning for 4ch surround recordings.
Viewing details and properties of the current file.
Viewing a list of marks added during WAV file recording.
Renaming stereo files according to specified rules.
Procedure for converting WAV files to MP3 format with bit rate selection.
Increasing the overall volume level of a recording.
Splitting a file into two at any specified point.
Removing unwanted individual files or all files in a folder.
Converting MS-RAW files into standard stereo files.
Converting 4ch surround files into stereo format.
Connecting to a computer to copy data from the SD card.
Recording to computer or outputting playback through the H2n.
How to use the tuner for chromatic, guitar, and bass tuning.
Setting up the metronome for count-in and tempo guidance.
Applying a low-cut filter to reduce wind and pop noise.
Adjusting input signal levels using compressor/limiter settings.
Configuring the unit to automatically adjust input gain.
Monitoring MID and SIDE signals during MS-RAW recording.
Choosing between WAV and MP3 formats based on quality and size.
Configuring start/stop thresholds and auto-stop delay for recordings.
Setting automatic file naming methods (default or date-based).
Setting the unit to pause when a mark is added during recording.
Adjusting how long the display backlight remains lit.
Setting the contrast level for the display screen.
Viewing the current system and software versions.
Resetting the recorder to its original factory default settings.
Viewing the remaining space and total capacity of the SD card.
Procedure for formatting an SD card for use with the H2n.
Instructions for updating the H2n's system software.
Guidance on using SD cards from previous H series recorders.
Operating the H2n remotely using an optional remote control.
Solutions for recording/playback problems and computer connection issues.
Details on recording media, file formats, and digital processing.
Lists key features, input/output jacks, and USB capabilities.
Information on power requirements, dimensions, weight, and included accessories.
Compliance information regarding FCC rules for digital devices.
Declaration of Conformity for EU directives and disposal guidelines.
Guide to installing WaveLab LE7 on Windows operating systems.
Instructions for installing WaveLab LE7 on Mac OS X.
To Next Page
