Zoom H2next - Advanced Recording Features; Pre-recording Function; Count-in Before Recording

Recording
Pre-recording
28
Recording
Counting in before recording
29
H2n Handy Recorder
When pre-recording is on, this recorder can continuously capture two seconds of
sound before recording is started manually. When is pressed, these two
seconds are included at the beginning of the recording. This is useful when, for
example, performances start suddenly.
Pre-recording
1.
Press .
2.
Use to select REC, and then
press .
3.
Use to select PRE REC, and then
press .
4.
Use to select ON, and then press .
5.
Press after returning to the home screen to start recording.
NOTE
∙
PRE REC cannot be used at the same time as the metronome PRE COUNT function.
∙ Pre-recording can only be used with an SD card.
Counting in before recording
1.
Press .
2.
Use to select TOOL, and then
press .
3.
Use to select METRONOME, and then
press .
4.
Use to select PRE COUNT, and then
press .
5.
Use to select the pre-count number,
and then press .
The built-in metronome can play a count-in sound before recording starts. This
pre-count sound is output through the /LINE OUT jack.
NOTE
PRE COUNT cannot be used at
the same time as PRE REC.
6.
Press after returning to the home
screen to start pre-count and recording.