Recording
Recording automatically
26
Recording
Recording automatically
27
H2n
Handy Recorder
Recording automatically
1.
Press .
2.
Use to select REC, and then press .
3.
Use to select AUTO REC, and then
press .
4.
Use to select ON/OFF, and then
press .
5.
Use to select ON, and then press .
6.
After the home screen reopens, press
to put the recorder in standby.
Recording will start automatically when the input
signal exceeds the REC START LEVEL.
Recording will stop automatically when the input
signal becomes less than the REC STOP LEVEL.
7.
Press to end recording standby and
stop recording.
The mic can be set to start and stop recording automatically in response to
changes in the input level.
NOTE
Automatic recording can only be used with an SD
card.
NOTE
Other settings can also be made for automatic
recording. (➝ P.74)
To Next Page
Loading...
