Zoom H2next - Computer Connectivity and File Transfer; Exchanging Files via USB (Card Reader)

Using USB
Exchanging fi les with a computer (Card reader)
58
Using USB
Exchanging fi les with a computer (Card reader)
59
H2n Handy Recorder
Using USB
1.
After turning the power on, connect the to a computer by a
USB cable.
Exchanging fi les with a computer (Card reader)
You can connect the recorder to a computer to check and copy data on the SD
card.
NOTE
∙ To run the
using USB bus power, connect it to a computer by USB while
the power is OFF.
∙ The
is compatible with the following operating systems.
Windows XP, Windows Vista, Windows 7, Macintosh OS X (10.2 or later)
5.
Unmount the card from the computer before
disconnecting the recorder.
Windows: Use “Safely Remove Hardware” to
select the
Mac: Drag and drop the icon into
the Trash
NOTE
Always follow t he proper procedu res on your
computer to unmount the
SD card before
disconnecting the USB cable.
6.
Disconnect the cable from the computer and
the
, and then press .
2.
Press .
3.
Use to select USB, and then press .
4.
Use to select SD CARD READER, and
then press .
The SD card will appear on the computer as a
connected drive where you can check the files
on it.