Zoom H2next - Automatic Recording Settings

Various settings
Changing automatic recording settings
74
Various settings
Changing automatic recording settings
75
H2n Handy Recorder
Changing automatic recording settings
1.
Press .
You can change settings related to the input level threshold that causes recording to start
and stop automatically, as well as the amount of delay before automatic stopping.
2.
Use to select REC, and then press .
3.
Use to select AUTO REC, and then
press .
4.
If you want to adjust the recording start
threshold, use to select REC START
LEVEL, and then press .
5.
Use to adjust the recording start
threshold, and then press .
6.
If you want to set the recording stop
threshold, use to select REC STOP
LEVEL, and then press .
8.
If you want to set the delay before recording
stops, use to select AUTO STOP,
and then press .
7.
Use to set the recording stop threshold, and then press .
NOTE
The AUTO REC STOP time is the delay until recording
stops after the input level drops below the REC STOP
LEVEL.
9.
Use to set the time, and then press
.