Zoom H2next - Basic Operations: Power and Hold; Turning Power On and Off; Using the Hold Function

Preparation
Turning the power ON and OFF
14
Preparation
Turning the power ON and OFF
15
H2n Handy Recorder
Turning the power ON and OFF
•
Slide down.
•
Slide up to the HOLD position.
•
Slide back to the middle.
Turning the power ON Using the hold function
In order to prevent accidental operation during recording, the has a hold
function that disables the use of controls other than the MIC GAIN.
Enabling the hold function
Disabling the hold function
NOTE
∙ If “No SD card!” appears, confi rm that an SD card is
correctly inserted into the recorder.
∙ If “C ard Pr ote cted” a ppears, SD c ard write
protection is ON. Turn write protection OFF by
sliding the “Lock” switch on the card.
∙ If “Invalid card” appears, the card format is
incorrect. Use a different card or format the card.
(➝ P.83)
•
Slide down and hold it until “Goodbye
see you!” appears on the screen.
Turning the power OFF
NOTE
Even when the hold function is on, the remote control
(sold separately) can still be used.