Other functions
Using a remote control
86
Troubleshooting
87
H2n
Handy Recorder
Using a remote control
By using a remote control (sold separately) you can operate the from a
distance.
•
Connect the remote control to the REMOTE jack on the .
The functions of the buttons on the remote are as follows.
Start and stop recording
Add marks (WAV format only)
Lights during recording
Pause (resume) recording
Troubleshooting
Recording/playback trouble
◆
There is no sound or output is
very quiet
· Check the connections to your
monitoring system and its volume
setting.
· Confirm that the volume of the
is not too low.
◆
The recorded sound cannot be
heard or is very quiet
· If you are using built-in mics,
confirm that the active mics are
oriented correctly and that the
recording mode is suitable. (
➝
P.20)
· Check the MIC GAIN setting.
(
➝
P.24, 70)
· If you are recording from a CD
player or other device connected to
the LINE IN jack, raise the output
level of the connected device.
◆
Recording is not possible
· Confi rm that the SD card has open
space. (
➝
P.82)
· If “Hold” appears on the display,
the h o l d fu n c t i o n is e n a b l e d .
Disable the hold function. (
➝
P.15)
Other trouble
◆
The recorder is not recognized by
a computer when connected by
USB
· Check that the OS of the computer
is compatible. (
➝
P.58)
· The
operation mode must
be selected on the recorder before
it will be recognized by a computer.
(
➝
P.58)
If you think that the
is not operating properly, please check the following
fi rst.
To Next Page
Loading...
