Zoom A3 - Equalization Adjustment; Balancing Original and Effected Sound; Master Level Adjustment

9
Adjusting the Tone and Volume
4
To adjust the equalization
5
To adjust the amount of the original sound
6
To adjust the master level
Adjust the balance between original (DRY) and effected (WET) signals.
t 5VSO .
t 5VSO
.
t 5VSO
.
NOTE
t 5IFFGGFDUFETJHOBMJTUIFTPVOEDSFBUFECZUIFQJDLVQTFMFDUJPOQSFBNQFGGFDUCPPTUBOEFRVBMJ[FS
settings.
t : Adjust to boost or cut low frequencies (around 60Hz) by up to ±12dB.
t
: Adjust to cut middle frequencies (around 700Hz) by up to –12dB.
t
: Adjust to boost middle frequencies (around 400Hz) by up to 12dB.
t
: Adjust to boost or cut high frequencies (around 8kHz) by up to ±12dB.
HINT