To Next PageTo Next Page
Need help?Do you have a question about the Zoom A3 and is the answer not in the manual?
General| Sampling Frequency | 44.1 kHz |
|---|---|
| Display | LCD |
| A/D Conversion | 24-bit |
| D/A Conversion | 24-bit |
| Power | AA batteries or AC adapter |
| Effects | Acoustic guitar modeling, effects |
| Frequency Response | 20 Hz – 20 kHz +1 dB -3 dB (10 kΩ load) |
| Dimensions | 160.3 (D) x 108 (W) x 54.8 (H) mm |
| Weight | 640 g |
Explains warning and caution symbols and lists general safety precautions.
Covers safe operation with AC adapter/batteries, product handling, environment, and cleaning.
Steps for turning the unit on using batteries or an AC adapter.
Explains how to use Bass, Middle, and Treble knobs for equalization.
Guides on adjusting the balance between DRY and WET signals.
Guides on selecting the specific type of effect for a chosen slot.
Instructions for adjusting the parameters of a selected effect.
How to activate the anti-feedback function to detect and cut feedback frequencies.
How to adjust the depth of the feedback filters.
Instructions for saving current settings as a new patch memory, including naming.
How to create or modify the sequence of patch memories for footswitch selection.
How to engage the tuner by pressing and holding the footswitch.
Guides on how to tune the guitar using the chromatic or other tuner types.
Steps to prepare the unit for firmware update, including connecting to a computer.
Instructions for running the firmware update application on the computer.
How to access the factory reset function by holding a button while powering on.
How to confirm and perform the factory reset operation.
Steps to troubleshoot power-on issues and resolve no sound or low volume problems.
Solutions for unwanted noise, sound distortion, and non-working effects.
Explains why batteries might drain quickly and how to optimize battery life.
