Zoom B1X FOUR - Using the looper; Activate the looper; Record a phrase; Play back the phrase

9
Using the looper
You can record your playing and create mono loop phrases that are up to 30 seconds long.
1.
Activate the looper.
• Press
.
To return to the previous mode, press
.
2.
Record a phrase.
• Press
.
To stop recording, press .
To cancel, press
.
3.
Play back the phrase.
• Press
.
To stop playback, press .
4.
Overdub the loop.
• Press
during loop playback.
To end overdubbing (and continue playback), press .
To clear the loop, you can press and hold when loop playback is stopped.
HINT
1
2, 3, 4
Setting the looper
• Turn
– to change looper settings.
• Changing the recording time, looper position
or tempo will clear the recorded loop.
• The looper can be placed before (Pre) or after
the effects (Post). Set to Pre, the sound before
effects are applied can be looped. Then, the
sound can be changed by switching patch
memories and editing the effects.
Recording
time
Loop
playback
stop mode
Looper
position
Looper
volume