Connecting with an UltraSync BLUE
03
F8 Multi Track Field Recorder
Connecting with an UltraSync BLUE
1. When the HOME screen is open, press and hold .
2. Use to select
Yes
, and
press
.
3. Use to select
Timecode
,
and press
.
“Searching ...” will appear on the display as the unit starts
searching for a device to connect.
HINT
• Searching can be canceled by pressing
.
• If searching has been canceled, it can be restarted by selecting
“Pair” on the “Timecode” screen.
4. On the UltraSync BLUE, select the as the device
to connect.
When pairing (registration) completes, “Connected.” will ap-
pear on the
display.
UltraSync BLUE Timecode
HINT
• See the UltraSync BLUE operation manual for information about
how to select the device to connect.
• Use the
and the UltraSync BLUE as close together as
possible to make communication more reliable.
• Even if communication with the UltraSync BLUE is interrupted
during recording, timecode counted by the
will be written
to the recording file.
When the is connected to an UltraSync BLUE, it can receive timecode from the UltraSync BLUE and write it to recording files.
To Next Page
Loading...
Need help?
General
