Zoom F8n Firmware Update Guide

6
4.
Use to select “Yes” and press .
5. After the update completes, turn the power off.
NOTE
・ During the firmware update, do not turn the power off or remove the SD card. It could cause the
F8n to be unstartable.
・ In the unlikely event that a firmware update should fail, conduct the procedures from the
beginning to update the firmware again.

Zoom F8n Specifications

General

Product color	Black, Blue
XLR in	Yes
Interface	XLR/TRS
Headphone outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Microphone input impedance	2000 Ω
Sample rate	192 kHz
Audio quality	24 bit
Frequency range	10 - 80000 Hz

Weight and Dimensions

Weight	1000 g
Dimensions (WxDxH)	178.2 x 140.3 x 54.3 mm