Zoom F8n Firmware Update Guide

5
The following is the same procedure for Windows and Mac.
1. Insert the SD card into the SD CARD 1 slot.
2. Install new batteries in the F8n or connect the AC adapter.
3.
Turn the power on while pressing .
NOTE
・ Always make certain that the power is off when inserting or removing a SD card. Inserting or
removing a card while the power is on could result in data loss.
・ When inserting a SD card, be sure to insert the correct end with the top side up as shown.
NOTE
・ If the SD card is loaded in the SD CARD 2 slot, eject it before updating.
①
②

Zoom F8n Specifications

General

Product color	Black, Blue
XLR in	Yes
Interface	XLR/TRS
Headphone outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Microphone input impedance	2000 Ω
Sample rate	192 kHz
Audio quality	24 bit
Frequency range	10 - 80000 Hz

Weight and Dimensions

Weight	1000 g
Dimensions (WxDxH)	178.2 x 140.3 x 54.3 mm