Need help?Do you have a question about the Zoom F2 and is the answer not in the manual?
Audio Specifications| directionality | Omnidirectional |
|---|---|
| sensitivity | –32 dB/Pa at 1 kHz |
| maximum sound pressure input | 115 dB SPL |
Physical Characteristics| cable length | 160 cm |
|---|
Audio Inputs and Outputs| input impedance | 2 kΩ or more |
|---|---|
| maximum input level | -5.5 dBu |
| maximum output level | 20 mW + 20 mW (into 32Ω load) |
Power| supported plug-in power | 2.5 V |
|---|---|
| power source | 2 AAA batteries (alkaline, lithium or rechargeable NiMH batteries) |
| AC adapter | DC 5 V/1 A |
Battery Life| continuous recording time with alkaline batteries | about 15 hours (F2) / about 14 hours (F2-BT) |
|---|---|
| continuous recording time with NiMH batteries (750 mAh) | about 11 hours (F2) / about 10 hours (F2-BT) |
| continuous recording time with lithium batteries | about 21 hours (F2) / about 18 hours (F2-BT) |
Dimensions and Weight| external dimensions | 57.5 mm (W) × 46.4 mm (D) × 22.4 mm (H) |
|---|---|
| weight | 32 g |
Details the primary interface for recording, showing time, battery, file name, format, input levels, and controls.
Explains the functionality of the screen operation lock switch, enabling or disabling screen operations.
Adjusts the low-cut filter to reduce noise, including air-conditioning, wind, and vocal pops.
Allows selection of recording format, file name, and file note for recorded files.
Details actions like adding marks and stopping the recording process.
Describes the interface for playing back recordings, showing playback time, file info, input levels, and playback controls.
Details functions like pause/resume, search, moving between marks, and stopping playback.
Explains how to use the FINDER screen to check and edit files on the SD card.
Details options for working with files: select, rename, and edit notes.
Describes how to use the on-screen keyboard to input characters for file names and notes.
Explains how to confirm input characters by tapping 'Enter' or cancel by tapping 'Return'.
Allows setting the current date and time for the device.
Enables selection of the battery type used in the F2-BT for accurate power management.
Sets the time until the F2-BT automatically turns off to conserve power.
Displays the version information for the F2-BT and F2 Control software.
To Next Page
