5. Use and to select “Pair With Device”, and press .
This reopens the Recording Screen.
“Searching” will appear on the display as the unit starts searching for a device to connect.
HINT
• Searching can be canceled by pressing any button.
• If searching has been canceled, it can be restarted by selecting “Pair With Device” on the “Timecode” screen.
6. On the other UltraSync BLUE, select the as the device to connect.
When pairing (registration) completes, “Connected” will appear on the display.
HINT
• See the UltraSync BLUE operation manual for information about how to select the device to connect.
• Use the and the UltraSync BLUE as close together as possible to make communication more
reliable.
• Even if communication with the UltraSync BLUE is interrupted during recording, timecode counted by the
will be written to the recording le.
7
To Next Page
Loading...
