Zoom MS-100BT - Page 4

4
4.7. After “Complete!” appears on the MS-100BT’s display, turn it off. Turn the MS-100BT
on again and confirm that the SYSTEM version is now v1.30.
NOTE
If updating the firmware should fail for any reason, the MS-100BT will still be ready for a
firmware update when it is restarted. Updating the firmware at this time is also possible. In
this case, before conducting the firmware update again, open the Bluetooth pane in the
Mac System Preferences and delete the ZOOM MS-100BT.
This completes the firmware update.
Z2I-1864-02