To Next PageTo Next PageWhat to do if patches cannot be switched on my Zoom Music Pedal?
If you cannot switch patches, the method for calling up patches may have been changed to "pre-select". To reset the unit to normal operation, turn the power off and then on again.
Why is there a high level of noise with my Zoom Music Pedal?
A high level of noise may occur if you are not using the specified ZOOM AC adapter. Ensure you are using an adapter for 9 V DC, 300 mA with a center minus plug (ZOOM AD-0006).
Why is the battery life so short on my Zoom Music Pedal?
Short battery life can occur if you are using manganese batteries. For optimal performance, use alkaline batteries, which provide a continuous operation time of 12 hours.
General| Input Impedance | 1 MΩ |
|---|---|
| Tuner | Yes |
| Power | 9V DC |
| Power Supply | 9V DC adapter or 6 AA batteries |
| Type | Bass multi-effects pedal |
| Input | 1/4" jack |
| Output | 1/4" jack |
| Headphone Output | 1/8" jack |
| Patches | 40 (user) + 40 (preset) |
Explains warning and caution symbols used in the manual for safe operation.
Covers safe handling, connecting cables, alterations, volume, and environmental considerations.
Details advice on electrical interference and cleaning the device.
Explains the module selector for switching between play, edit, and rhythm modes.
Details the INPUT, OUTPUT/PHONES, and DC IN jacks for connectivity.
Covers the VALUE knob, STORE, PEDAL ASSIGN, BANK UP TAP, and foot switches.
Highlights features unique to the B1X model, like the expression pedal.
Instructions for powering on the unit and setting it to play mode.
How to switch between patches using foot switches and banks.
How to switch the tuner into bypass or mute mode using foot switches.
Steps for tuning the bass by playing open strings and observing the display.
How to select rhythm mode and start/stop the drum patterns.
How to choose which effect module and parameter to edit.
Steps to perform a factory reset of all patches and settings.
