Need help?Do you have a question about the Zoom G2 and is the answer not in the manual?
General| User Patches | 40 |
|---|---|
| Presets | 40 |
| A/D Conversion | 24-bit |
| D/A Conversion | 24-bit |
| Signal Processing | 32bit |
| Power | 9V DC adapter (included) |
| Patch Memory | 40 patches |
| Input | 1/4" mono |
| Output | 1/4" phone jack |
| Control Input | 1/4" expression pedal |
| Power Requirements | DC9V/300mA/Center Minus Type |
| Power Supply | DC9V |
Covers usage, electrical, environmental, and handling precautions.
Summarizes advanced processing, effects, rhythm, tuner, and user interface.
Defines modules, types, parameters, patches, and modes.
Describes all controls, jacks, and connections on the unit.
Covers patch selection, tone/volume tweak, and saving changes.
Procedure for using the auto-chromatic tuner.
How to use the built-in rhythm patterns.
Step-by-step guide to modify patch settings.
Procedure for storing edited or existing patches.
How to set up and use optional accessories.
Resetting the unit and understanding effect chaining.
Guide to effect listings and explanation of COMP/WAH/EFX.
Details on distortion and noise reduction effects.
Details on EQ, cabinet simulation, and modulation effects.
Details on various delay and reverb effects.
Covers master settings, device specs, and common issues.
Catalog of built-in rhythm patterns.
Explanations of real-world amps/pedals for drive effects.
Explanations of real-world amps/pedals for other effects.
To Next Page
