Need help?Do you have a question about the Zoom Guitar Effects Console G9.2tt2q and is the answer not in the manual?
General| Brand | Zoom |
|---|---|
| Model | Guitar Effects Console G9.2tt2q |
| Category | Music Pedal |
| Language | English |
Explains how to select and navigate through patches using the foot switches and knobs.
Guides on switching effect modules on/off using foot switches in manual mode.
Details how to select an effect module and adjust its parameters within edit mode.
Explains the process of saving edited patches or swapping their locations in memory.
Details the steps to select patches using foot switches and bank selection.
Explains how to adjust pre-amp parameters like distortion type and EQ while in play mode.
Explains how to use foot switches to turn individual effect modules on or off in manual mode.
Outlines the steps for selecting modules and adjusting effect parameters in edit mode.
Details how to toggle modules and adjust their types and parameters using knobs.
Explains how to save and swap individual patches in memory.
Details how to save and swap entire banks of patches.
Guides on assigning parameters and ranges for Expression Pedal 1.
Details assigning parameters and ranges for Expression Pedal 2 (vertical/horizontal).
Provides instructions for calibrating the physical feel and response of Expression Pedal 1.
Details the calibration procedure for Expression Pedal 2's physical feel and response.
Guides on selecting and assigning functions like tempo tap, delay tap, and module on/off to foot switches.
Explains direct and mapping modes for patch selection using MIDI program change.
Details sending/receiving control change messages for pedal, switch, and key operations.
Explains sending and receiving patch data between G9.2tt units using MIDI system exclusive.
Guides on setting the MIDI receive and transmit channels for communication.
Guides on assigning specific MIDI CC numbers to functions for control.
Describes the Auto-Repeat Real-time Modulation feature for parameter modification.
Guides on connecting and using the G9.2tt as a computer audio interface.
Explains how to mute the direct output signal when the unit is used as an audio interface.
Guides on optimizing sound by matching the unit to different amplifier types.
Explains how algorithms switch for live or direct recording based on CABINET status.
Explains how to alter the signal chain order of modules like PRE-AMP and WAH/EFX1.
Lists the various amp simulation effect types and their parameters.
Addresses problems like no sound, distortion, noise, and strange bypass sounds.
Troubleshoots issues with foot switches, expression pedals, and MIDI communication.
Guides on adjusting the resistance for the horizontal movement of Expression Pedal 2.
Provides instructions for adjusting the resistance for the vertical movement of Expression Pedals 1 and 2.
To Next Page
