Need help?Do you have a question about the Zoom g9.2tt and is the answer not in the manual?
General| Effects | Over 100 |
|---|---|
| Presets | Up to 100 |
| Amp Modeling | Yes |
| Tube Emulation | Yes |
| Expression Pedal | Yes |
| USB | Yes |
| A/D Conversion | 24-bit |
| D/A Conversion | 24-bit |
| Sampling Frequency | 44.1 kHz |
| Display | LCD |
| Effect Types | Distortion, Modulation, Delay, Reverb, EQ |
| Inputs | 1 x Instrument, 1 x Aux |
| Outputs | 2 x 1/4" (L/Mono, R) |
| MIDI | In/Out |
| Power | AC Adapter |
| Type | Multi-Effects Processor |
Initiates the built-in inspection program for hardware verification.
Details how to set all controls to factory default values.
Details the adjustment procedure for the input side of the Accelerator.
Details the adjustment procedure for the output side of the Energizer.
Lists components for the Panel PCBs.
Details mechanical parts specific to the Z-PEDAL.
Lists materials used for packaging the unit.
Describes the solution for optical sensor issues with the EX-PEDAL.
Describes the solution for optical sensor issues with the Z-PEDAL.
Details how to adjust the EX PEDAL SW for proper operation.
Details how to adjust the Z PEDAL SW for proper operation.
Shows the overall internal layout and harness placement.
Highlights areas to avoid when working with harnesses to prevent noise.
To Next Page
