Zoom g9.2tt - Factory default setting

-16 -
42. Factory default setting
Set the knobs and switch as follows:
OUTPUT VOLUME Center
All EFFECT VOLUME Turn anticlockwise till limit
All ENERGIZER VOLUME Turn anticlockwise till limit
TUBE VOLUME OF ACCELERATOR Adjust to 5 (center)
SOLID STATE VOLUME OF ACCELERATOR Adjust to 5 (center)
GAIN SW (both OUTPUT and EXT LOOP) -10 dBm
EX PEDAL (both 1 and 2) MAX(contact with the gum)
Z PEDAL Move to left till limit
Lock arm raise
POWER OFF
If the unit was operated, carry out the All Initialize function for certain before shipment.