Need help?Do you have a question about the Zoom G1 and is the answer not in the manual?
General| Simultaneous Effects | 5 |
|---|---|
| A/D Conversion | 24-bit |
| D/A Conversion | 24-bit |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Patch Memory | 40 |
| Weight | 350g (without batteries) |
| Inputs | 1/4" phone jack |
| Outputs | 1/4" phone jack |
| Effects Types | Compressor, Overdrive, Distortion, EQ, Chorus, Flanger, Phaser, Tremolo, Vibrato, Delay, Reverb |
Details the number of effects and simultaneous modules.
Covers patch storage capacity and sampling rate.
Technical details on AD/DA conversion, processing, and frequency range.
Specifies input/output levels, power requirements, and accessories.
Verifies the 7-segment LED display and module selector functionality.
Tests knob, flash ROM, product number display, and expression pedal.
Checks footswitches, through sound, delay, DSP mute, and battery tests.
Covers factory reset, audio quality, and stability verification.
Step-by-step guide to back up effect patch data.
Instructions to restore the unit to its original factory settings.
Introduction to special startup modes and test mode activation.
Details on adjusting the 16-click threshold.
Verifies module selector outputs and other special function indicators.
Procedures for factory reset, firmware revision, and version display.
Detailed electrical specifications for circuit performance verification.
Diagram showing component placement on the top side of the PCB.
Diagram showing component placement on the bottom side of the PCB.
Diagram illustrating how the pedal's components fit together.
Comprehensive list of parts used on the main circuit board.
Listing of physical housing and external parts.
Details of packaging, manuals, and labels included.
Table providing part names, drawing numbers, and order codes.
Explains how to identify the main PCB version for different production runs.
To Next Page
