Zoom G1 User Manual

- 3 -
Specifications
Effect types 54
Effect modules max. 8 simultaneous modules
Patch memory User area: 10 patches x 4 banks = 40
Preset area: 10 patches x 4 banks = 40
Total 80 patches
Sampling frequency 96 kHz
A/D converter 24 bit, 128 times oversampling
D/A converter 24 bit, 128 times oversampling
Signal processing 32 bit
Frequency response 20 Hz – 40 kHz +1.0 dB – 4.0 dB (10kilohms load)
Display 2-digit 7-segment LED
Input Standard mono phone jack
Rated input level -20 dBm
Input impedance 470 kilohms
Output Standard stereo phone jack (doubles as line/headphone
jack)
Maximum output level Line +3 dBm (output load impedance of 10 kilohms or
more)
Phones 20mW + 20mW (into 32ohms load)
Control input For FP01/FP02 or FS01
Power requirements
AC adapter 9 V DC, 300 mA (center minus plug) (ZOOM
AD-0006)
Batteries Four IEC R6 (size AA) batteries, approx.
12 hours continuous operation (alkaline batteries)
Dimensions 155 mm (D) x 136 mm (W) x 52 mm (H)
Weight 350 g (without batteries)
Options Expression pedal FP01/FP02 or Foot switch FS01
• 0 dBm = 0.775 Vrms
• Design and specifications subject to change without notice.

Zoom G1 Specifications

General

Simultaneous Effects	5
A/D Conversion	24-bit
D/A Conversion	24-bit
Input Impedance	1 MΩ
Output Impedance	1 kΩ
Patch Memory	40
Weight	350g (without batteries)
Inputs	1/4" phone jack
Outputs	1/4" phone jack
Effects Types	Compressor, Overdrive, Distortion, EQ, Chorus, Flanger, Phaser, Tremolo, Vibrato, Delay, Reverb