Zoom G2.1NU User Manual

OPERATION MANUAL
© ZOOM CORPORATION
Copying or reproduction of this document in whole or in part without
permission is prohibited.
Thank you very much for purchasing the ZOOM G2Nu/G2.1Nu (in this manual, we
will call it the G2Nu/G2.1Nu). Please read this manual carefully to learn about all the
functions of the G2Nu/G2.1Nu so that you will be able to use it fully for a long time.
Keep this manual in a convenient place for reference when necessary.
Contents
Usage and Safety Precautions . . . . . . . . . . . . . . 2
Terms Used in This Manual .................3
G2Nu Part Names . . . . . . . . . . . . . . . . . . . . . . . 4
G2.1Nu Part Names ......................6
Select a Patch and Play (Play Mode) .........8
Using the Tuner .........................10
Using the Looper ........................13
Using Rhythms (Rhythm Mode) . . . . . . . . . . . . 16
Creating and Changing Patches (Edit Mode) . . 18
Saving and Copying Patches (Store Mode) ...22
Using Direct Mode .......................24
Patch Pre-selection (PRE SELECT) . . . . . . . . . 25
Using a Foot Switch. . . . . . . . . . . . . . . . . . . . . . 26
Using an Expression Pedal ................27
Set the control parameter and adjustment range . 27
Adjusting the built-in expression pedal . . . . . . . . 28
Using Audio Interface Functions . . . . . . . . . . . . 29
Recording and playback with DAW software ... 29
Changing Various Settings (Global Menus) ....30
Open the global menus . . . . . . . . . . . . . . . . . . . . 30
Set the master level, tempo, and tuner
standard pitch. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Set the direct monitoring and recording levels ... 30
Set the display backlight and contrast . . . . . . . . . 31
Setting the battery type . . . . . . . . . . . . . . . . . . . . 31
Check the current version . . . . . . . . . . . . . . . . . . 31
Upgrading the Firmware Version ............32
Effect Types and Parameters . . . . . . . . . . . . . . 33
COMP (compressor) module .............. 34
EFX module ........................... 35
ZNR (ZOOM noise reduction) module ....... 37
DRIVE module ......................... 38
EQUALIZER module
(low and middle frequency range) .......... 40
EQUALIZER module (high frequency range) . 40
MODULATION module .................. 41
DELAY module ........................ 46
REVERB module ....................... 47
TOTAL module ......................... 48
Troubleshooting .........................49
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Rhythm List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Zoom G2.1NU Specifications

General

Type	Multi-Effects Processor
A/D Conversion	24-bit
D/A Conversion	24-bit
Frequency Response	20 Hz - 20 kHz
Input Impedance	1 MΩ
Display	LCD
Expression Pedal	Yes
USB	Yes
Effects Types	Distortion, Modulation, Delay, Reverb, EQ
Presets	40 User, 40 Preset
Inputs	1 x 1/4" (instrument)
Outputs	2 x 1/4" (L/Mono, R)
Power Supply	AC adapter
Power	9V
Weight	2.2 lbs

Summary

Usage and Safety Precautions

Safety Warnings and Symbols

Explains symbols and general safety warnings.

Operational Precautions

Covers power, environment, handling, connections, alterations, volume, cleaning, and malfunction.

Using the Tuner

Tune the Guitar

Steps for tuning the guitar.

Using the Looper

Activate the Looper

Steps to engage the looper function.

Set Recording Time and Tempo

Configuring duration and tempo for loops.

Using the Looper

Record and Overdub Phrases

Capturing, replaying, and layering audio phrases.

Creating and Changing Patches (Edit Mode)

Select Patch and Module for Editing

Choosing what to edit.

Creating and Changing Patches (Edit Mode)

Module Control and Parameter Adjustment

Turning modules on/off and adjusting parameters.

Adjust Patch Volume and Name

Setting overall patch volume and name.

Saving and Copying Patches (Store Mode)

Activate Store Mode and Select Location

Entering save mode and choosing destination.

Execute Patch Save/Swap

Finalizing save/swap.

Restore Factory Settings (ALL INITIALIZE)

Resetting all patches.

Patch Pre-selection (PRE SELECT)

Select and Confirm Patch

Using a Foot Switch

Connect and Configure Foot Switch

Physical connection and setting functions.

Using an Expression Pedal

Set Control Parameter and Adjustment Range

Configuring pedal control and its range.

Using an Expression Pedal

Adjusting the Built-in Expression Pedal

Using Audio Interface Functions

System Requirements and DAW Integration

Covers OS, audio formats, and DAW use.

Changing Various Settings (Global Menus)

Access and Adjust Global Settings

Opening menus and setting master level, tempo, tuner pitch, and audio levels.

Upgrading the Firmware Version

Download Update Application

Perform Firmware Update

Steps to connect, update, and restart.

Effect Types and Parameters

DELAY Module Details

COMP (Compressor) Module Types

ZNR (Noise Reduction) Module Types

DRIVE Module Amp Emulations

More DRIVE Module Emulations

MODULATION Module Types

Delay Module Variations

REVERB Module Types

Effect Types and Parameters

EQUALIZER Module Settings

Details EQ Lo and EQ Hi adjustments.

Troubleshooting

Common Operational Issues

Covers unit not turning on, no sound, noise, and patch change problems.

Effect, Pedal, and DAW Issues

Addresses issues with effects, expression pedal, and DAW recording levels.

Battery and Sound Quality Problems

Specifications

Technical Specifications Overview

Modeling Description Reference

Classic Amp Emulations

USB/Cubase LE 4 Startup Guide

USB/Cubase LE 4 Startup Guide

USB/Cubase LE 5 Startup Guide

Installation and Setup

Covers Cubase LE 5 installation on Windows and Mac, and initial setup.

USB/Cubase LE 5 Startup Guide

Checking Recorded Content