25
ZOOM G2Nu/G2.1Nu
1. Turn the power ON while pressing the [▲]
foot switch.
"PRESELECT"appearsonthescreenandthe
unit starts in pre-select mode.
2. Use the [▼]/[▲] foot switches and bank
[▼]/[▲] keys to select the next patch.
Patch selection is the same as in ordinary play
mode. However, the patch does not change until
confirmation is completed in step three.
If you enter edit mode or store mode when the
screen for step 2 is open, the current patch is the
one affected.
3. To change the patch, press both [▼]/[▲]
foot switches at the same time.
To return to the usual patch order, turn the power
OFF and ON again.
Patch Pre-selection (PRE SELECT)
The pre-select mode allows you to select a bank and patch in advance, and only switch to that patch after you confirm
the selection. This function is convenient during a live performance when you want to prepare switching to a patch
that is saved in a distant position.
Current patch
Next patch to be selected
To Next Page
Loading...
Need help?
General
