Zoom G2.1NU User Manual

26
ZOOM G2Nu/G2.1Nu
1. Connect a foot switch (FS01) to the
CONTROL IN jack.
2. Press the USB/GLOBAL key to light it and
open the GLOBAL menu.
3. Use the effect type [▼]/[▲] keys to select
"FootSwitch."
4. Turn Parameter knob 1 to set the foot
switch function.
The foot switch can be set to one of the following
functions.
BP/MT Set the unit to bypass/mute.
BANK UP Increase the bank number by one
with each press of the foot switch.
RHYTHM TurnRhythmmodeON/OFF.
BPM TAP Set the tempo used for the rhythm,
looper and effect by pressing the
foot switch repeatedly at the
desired tempo.
DL TAP Set the Time parameter of the
DELAYmodulebypressingthe
foot switch repeatedly.
DLHOLD Turn hold delay ON/OFF. Hold
delay is a function that allows the
delay sound to be repeated without
decay(seetheillustrationbelow).
DL MUTE TurntheDELAYmodule'sinput
mute ON/OFF.
TouseDLTAP,DLHOLDorDLMUTE,you
mustturntheDELAYmoduleON.
5. After making the setting, press the USB/
GLOBAL key again to turn its light out.
HINT
The foot switch function setting affects all
patches. Moreover, this setting is saved even
when the power is turned OFF.
UsingaFootSwitch
YoucanconnectanoptionalfootswitchtotheCONTROLINjack,anduseittocontroladditionalsettingsoftheunit
with your feet, for example, by changing banks and operating effects.
Sound
source
Delay sound
Press the foot switch
Hold delay
Hold
Press again
HINT
Foot switch function

Zoom G2.1NU Specifications

General

Brand	Zoom
Model	G2.1NU
Category	Music Pedal
Language	English