Zoom G2.1NU - Activate Store Mode and Select Location

22
ZOOM G2Nu/G2.1Nu
SavingandCopyingPatches(StoreMode)
1. Activate store mode
2. Selectthelocationtosaveortheotherpatchtoswap
Select the patch that you want to save or copy, and press the STORE/SWAP key.
Use the [▼]/[▲] foot switches.
■ To save the patch
ReleasetheSTORE/SWAPkeyquickly.
"Store?" appears on the display.
■ To swap the patch
Continue pressing the key until "Swap?" appears on the display.
Locationto
save patch
Patch to save
Second patch
to swap
Patch to swap
HINT
• Swappingcanonlybebetweenpatchesintheuser(A–J)banks.
• Whentheunitisshippedfromthefactory,theuserbankscontain
the same patches as the preset banks.
HINT
Toswitchbanks,usethebank[▼]/[▲]keys.
NOTE
Swappingcanonlybebetweenpatchesintheuser(A–J)banks.