No. PART NAME SPECIFICATIONS DESCRIPTION REFELENCE NO. Q'TY
1 G9.2tt TOP CASE Z2A-0108 SECC, T=1.20MM (42) Painted: black with a little silver 1
2 G9.2tt BOTTOM PLATE Z2A-0109 SECC, T=1.20MM (75) Painted: black 1
3 G7.1ut SWITCH BUTTON A Z2B-0195 ABS(SMOKE CLEAR)
(54) SWITCH BUTTON SINGLE
Side painted:black
20
4 VR KNOB 1 Z2B-0160 ABS (41) Chromium coatings 1
5 VR KNOB 2 Z2B-0161 ABS
(28) Chromium coatings ,
with Point mark (Color: black)
6
6 G7.1ut VR KNOB 2 Z2B-0200 ABS
(25) KNOB _black_piont,
with indicator (color: red)
4
7 G7.1ut ENCODER KNOB 2 Z2B-0201 ABS (29) KNOB _black_no_piont, black 5
8 G7.1ut VR KNOB 3 Z2B-0202 ABS (49) level_KNOB, black, with indicator (color: red) 1
9 G7.1ut SIDE COVER L Z2B-0203 ABS+TPE/PPU,black (35) 1
10 G7.1ut SIDE COVER R Z2B-0204 ABS+TPE/PPU,black (90) 1
11 G7.1ut DISPLAY COVER Z2B-0205 ABS,Chromium plated (34) 1
12 G7.1ut DISPLAY SHEET Z2E-0214 PC, with adhesive, t=1.0mm (97) silk print :3 colors 1
13 G7.1ut FOOT SW BRACKET Z2A-0093 SECC, T=1.00MM (85) TO SURPORT THE TOP CASE 2
14 G9.2tt FOOT SW BRACKET 2 Z2A-0116 SECC, T=1.00MM
(87) TO FIX THE PCB TO THE TOP CASE
under the shield plate (1/2)
1
15
FOOT RUBBER B Z2D-0040-A4 D1 ,NR RUBBER 3mmTH'K (99) with adhesive tape/ 40mmX15mmX3mmXR1
10
16 G7.1ut EX PEDAL GUIDE Z2A-0095 SECC, T=1.6MM (22) PAINTED BLACK 1
17 G7.1ut AC BARCKET Z2A-0096 SGCC,T=1.0 (72) 1
18 FOOT SW UNIT Z2A-0089 (86) 9
19 G7.1ut FOOT SW DRESS PLATE Z2B-0206 ABS,Chromium plated (24) 9
20 G7.1ut EX PEDAL BASE Z2B-0211 ADC12 (31) Painted silver color 1
21 G7.1ut EX PEDAL RUBBER Z2D-0058 TPE, black (30) 1
22 G7.1ut EX PEDAL POLE Z2A-0101 45#,Chromium plated (95) 1
23 G7.1ut REFLECT BRACKET Z2B-0207-A ABS. black (38) EX-PEDAL & Z-PEDAL 2
24 G9.2tt TUBE BRACKET A Z2A-0111 SECC. T=1.0 (53) 2
25 G9.2tt TUBE SP BRACKET Z2A-0112 SECC. T=1.0 (96) 1
26 G9.2tt MACHINE BAR Z2A-0110 AL, SHINING SURFACE (32) 1
27 G9.2tt SIDE BRACKET_LEFT Z2A-0124 SECC. T=1.20MM (36) 1
28 G7.1ut SIDE BRACKET_RIGHT Z2A-0099 SECC. T=1.20MM (91) 1
29 REFLECT SEAL Z2E-5032-A4 10x10x0.05mm
(102) for PHOTO REFLECTOR
EX-PEDAL & Z-PEDAL 3
30
GFX3 CUSHION RUBBER Z2D-0042-A4 KH-3 65(BLACK)
(16), (17) for EX PEDAL(on-off cushion)
With washer
4
31 G7.1ut EX PEDAL BUTTON Z2B-0208 ABS, BLACK. (51) EX-PEDAL & Z-PEDAL 2
32 G7.1ut CORD HOOK Z2B-0209 ABS, BLACK. (44) 1
33 G7.1ut EX PEADAL BRACKET Z2B-0210 POM (19) 1
34 G7.1ut EX PEDAL BRACKET PLATE Z2A-0100 SECC, T=1.20MM (20) 1
35 G7.1ut EX BUTTON PAD Z2D-0059 sponge,black,T=3.0, Hardness=55 (52) EX-PEDAL & Z-PEDAL 2
36 G7.1ut SHIELD CASE Z2A-0105 SGCC t=0.5mm (47) 1
37 G7.1ut EX PEDAL SPACER Z2B-0212 POM (21) 2
38 G7.1ut LED SPACER SUPPORT 1 LED-16 NYLON (84) 8
39 G7.1ut LED SPACER SUPPORT 2 LED3-16 NYLON (82) 1
40 G7.1ut THREAD SPACER HP_12A NYLON (65) 3
41 G9.2tt ROUD SPACER 3-2 NYLON (58) 3
42 G7.1ut SPACER SUPPORT 2 MADM-2 NYLON (57) 7
43 G7.1ut foil oil 0132 1
44 TAPE SCREWS
M3.0X6LCOMMON
HEAD,black
SWCH(Fe), Black Chromate
(77) fix the plastic support -THREAD SPACER(4)
ex pedal pcbX4
8
45 SCREW M3.0X12L SWCH(Fe), Black Chromate (68) assemble the sub_panel pcb and panel pcbx4,heat sinkx2 4
46 SCREW M3.0X14L P_TIGHT SWCH(Fe), Black Chromate, fix The ZM-SP_01/02 (98) 3
47 NUT M3.0,black SWCH(Fe), Black Chromate (67) assemble the sub panel pcb and panel pcbx2,heatsinkx2 4
48 SCREW D3.0X5L, S-TIGHT SWCH(Fe), Black Chromate
(76) fix the bottom+all bracket(12),top case+bottom(8),
side cover+top case(8),tube bracket(6),
ft sw pcb+ft sw bracket(9),top case+penel pcb(2)
panel pcb+copper(1)
ac/dc(1),,fix the machine bar(8)
55
49 SCREW M3.0x8L,S-TIGHT SWCH(Fe), Black Chromate
(18) fix the bottom to the side cover(6).
the tube bracket B+panel pcb(1).
Fix the ex_pedal to the top casex4,cord hook(1),
reflect bracket+pcb(1)
13
50 SCREW M2.6x5L,P-TIGHT SWCH(Fe),Black Chromate (45) FIX THE DISPLAY COVERX4 4
51 SCREW M2.6x4L,P-TIGHT SWCH(Fe),Black Chromate (88) dress plate x18,display cover x2,machine bar x6 20
52 PLAIN WASHER d6.6xd3.2xt1.0 SWCH(Fe),Black Chromate (100) dress plate x18,,display cover x4 22
53 SPRING WASHER d5.2xd3.2xt1.0 SWCH(Fe),Black Chromate (40) ex_bracketx4 , machine barx2,z_pedalx4,heatsinkx2 12
54 G7.1ut SCREW
Z2B-0032, no head
M4.0X5.0,BLACK,
SWCH(Fe),Black Chromate (10) 2
55 SCREW
M4.0x8L, HEXAGON,
SOCKET HEAD
SWCH(Fe),Black Chromate (14) EX_BRACKET 1
56 SCREW M3.0x8L,P-TIGHT SWCH(Fe),Black Chromate
(37) REFLECT BRACKET X2, MIDI JACKX2
SIDE COVER RIGHT/LEFT+BRACKETX14,ZM-SPX6
24
57 G7.1ut PCB SPACER HP-13.5 NYLON (48) 2
58 G9.2tt HEATSINK
Z2A-0113
al. 5052 (69) 135x60mm T=2mm alminium 1
59 G9.2ut ZM_SP_01
Z2B-0223
POM (70) 3
60 G9.2ut ZM_SP_02
Z2B-0224
POM (64) 3
61 G9.2tt TUBE COVER A
Z2A-0119
SGCC (78) 1
62 G9.2tt TUBE COVER B
Z2A-0120
SGCC (74) 1
63 G9.2tt Shield plate
Z2A-0121
SGCC (62) T=0.5mm 1
64 G9.2tt rubber pad
Z2D-0061
rubber (60) 15x10x3, with single side hesive tape. 2
65 G9.2tt copper support
Z2A-0122
copper (61) d=6.0, M3.0 THR.H=7.0 2
66 G9.2tt ROUND SPACER
3.5-12
nylon (26) 1
67 TAPE SCREWS M3x22L,S-TIGHT SWCH(Fe), Black Chromate ,Cross Binding Head, (27) fix the main pcb and ft pcb support 1
68 SCREW M3.0X9L SWCH(Fe), Black Chromate (23) fix the copper and the panel pcb, 1
69 EX-PEDAL SPRING Z2A-0123 (15) d=0.4,L=7.0,D=5.2 3
70 TAPE SCREW M3x8L B-TIGHT SWCH(Fe), Black Chromate B-TIGHT (89) FLAT HEAD M3x8L 4
71 SCREW F3.0x4,S-TIGHT SWCH(Fe), Black Chromate (5) 2
72 PLAIN WASHER d=14.0xd=8.5xt=0.5 SWCH(Fe) (46) EX-PEDALX4 4
73 SPACER d=10.0 t=0.1 PAPER with adhesive (66) When EX-PEDAL & Z-PEDAL are adjusted, it uses it. 2
74 FILAMENT TAPE tape 3M 8915 Scotch 8915 Filament Tape, 12mm width, L=60mm 1
75 Glue For EX PEDAL RUBBER SL518 1
76 CUSHION EX-PEDAL Z2D-0062 sponge,black, 40x20 t=10.0 , Hardness=40 (33) 1
- 49 -
To Next Page
Loading...
