Zoom MULTISTOMP MS-100BT User Manual

Thank you very much for purchasing the ZOOM .
Please read this manual carefully to learn about all the functions of the
so that you will be able to use it fully for a long time.
Keep this manual in a convenient place for reference when necessary.
OPERATION MANUAL
© 2012 ZOOM CORPORATION
Copying or reproduction of this document in whole or in part without permission is prohibited.
If the is not used for 10
hours, it will turn off automatically
by default.
If you want the power to stay ON all the time,
please see "4 To set the Power Management
function" on page 22 and set the value to OFF.
* A printed list of effect parameters is not included with the .
Please download a copy from the ZOOM website.
→
http://www.zoom.co.jp/downloads/

Zoom MULTISTOMP MS-100BT Specifications

General

Type	Multi-Effects Pedal
Simultaneous Effects	Up to 6
Patch Memory	50
Sampling Frequency	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Frequency Response	20 Hz - 20 kHz
Display	LCD
Effects	100
Effect Types	Delay, Reverb, Modulation, Distortion
Number of Effects	100
Inputs	1 x 1/4" (instrument)
Outputs	1 x 1/4"
Connectivity	Bluetooth
Power Supply	AA batteries (x2) or AC adapter
Battery Life	Approx. 7 hours (alkaline batteries)

Summary

Introduction to ZOOM MS-100BT

Add New Effects Wirelessly

Use Bluetooth to connect MS-100BT to an iOS device running StompShare to add new effects.

Combine Multiple Effects

Safety Precautions

Operation and Handling Safety

Covers safe operation with AC adapter/batteries, product handling, and avoiding alterations.

Usage and Environment Safety

Details safe operating environments, cable connections, volume usage, cleaning, and malfunction procedures.

Parameter Knobs and Cursor Keys

Parameter Knob Functions

Explains how to use Parameter Knobs 1, 2, and 3 for adjustments and menu navigation.

Cursor Key Functions

Turning the Power ON

Powering Unit with Batteries

Powering Unit with AC Adapter

Connecting to Amplifier and Powering Up

Adjusting Effects

Turning Effects ON and OFF

Use the footswitch to toggle effects ON or OFF; the LED indicates status.

Selecting Effect Type

Press cursor keys to change effect type; press and hold to select category.

Adjusting Parameters

Turn parameter knobs to adjust values for selected effect parameters.

Effect Processing Limit

Patch Memory Management

Selecting a Patch Memory

Open MEMORY list, then turn knobs to select and save patch memories.

Saving Patch Memory with New Name

Rename and save existing patch memories or create new ones.

Footswitch Patch Memory Control

Managing Footswitch List

Footswitch Patch Memory Cycling

Using Multiple Effects

Adding Effects to the Chain

Open ADD EFFECT UNIT screen, select category, and choose effect.

Removing Effects from the Chain

Navigate MENU to DELETE EFFECT UNIT, select effect, and confirm deletion.

Managing Multiple Effects

Scrolling Through Active Effects

Changing Effect Order in Chain

Tuner Operation

Activating and Deactivating Tuner

Activate tuner by holding footswitch; press to end tuning.

Configuring Tuner Settings

Change standard pitch and select different tuner types.

Tuner Configuration and Usage

Tuner Modes Explained

Instrument Tuning Process

Tempo Synchronization via Footswitch

Setting Tempo via Footswitch Tapping

Manual Tempo Setting

Setting Tempo via Knob Tapping

Bluetooth Connectivity

Connecting to an iOS Device

General Settings Configuration

Accessing the Settings Menu

Configuring Footswitch Hold Function

Tuner Mode Settings

Power Management Settings

Auto Save Settings

Factory Reset Procedure

Executing All Initialize Function

Restores all settings, including patch memories, to factory defaults.

Troubleshooting Common Issues

Power and Volume Problems

Addresses unit not turning on and issues with no sound or low volume.

Noise and Battery Issues

Covers causes of noise and rapid battery drain.

Effect Malfunctions

Explains 'DSP Full!' message and effect bypassing.

Troubleshooting Connectivity

Bluetooth Pairing and Connection Issues

Resolves problems with pairing or connecting to an iOS device.

Communication Stability Problems

Addresses issues with stable communication between devices.

Tuner Type Reference