Zoom MULTISTOMP MS-100BT - Turning the Power ON; Powering Unit with Batteries; Powering Unit with AC Adapter; Connecting to Amplifier and Powering Up

8
Turning the Power ON
Turning the Power ON
1. Lower the amplifier’s volume all the way.
2. Power the unit with batteries or an adapter.
1
To turn the power ON
Open the cover on the bottom
of the unit and insert batteries
in the compartment.
Connect an AD-16 adapter.
<When using batteries>
<When using an adapter>
Bottom of the unit
3. Plug a guitar cable into the INPUT jack.
4. Connect to an amp, then turn the amp on and
raise the volume.
HINT
t 8IFOVTJOHCBUUFSJFTUIFQFEBMXJMMQPXFSPOXIFO
a cable is connected to the L input jack.