Zoom MULTISTOMP MS-100BT - Factory Reset Procedure; Executing All Initialize Function

34
Restoring the to its Factory Default Settings
Restoring the to its Factory Default Settings
The All INITIALIZE screen
appears.
Press
NOTE
t Executing the All Initialize function will restore all the
settings of the , including its patch
memories, to factory defaults. Do not use this function
unless you are certain that you want to do this.
t This operation does not delete effects that have been
added to the pedal.
1. While pressing and holding
turn the power ON.
2. Press the footswitch to execute it.
1
To execute the All Initialize function
The All Initialize function restores all the factory
default settings.