Zoom UIB-01 - Windows 2000 Driver Installation

15
ZOOM UIB-01
Preparations
Windows 2000 driver installation
1.
Verify that the following indication is shown on the
computer screen, and click on the [Next] button.
* If the indication is not shown → p.31
2.
On the next screen, place a check mark in "Search for a
suitable driver...", and click on the [Next] button.
14
ZOOM UIB-01
Preparations
3.
After a while, the following screen will be shown. Place a
check mark in "Automatic search for...", and click on the
[Next] button.
4.
After a while, the following screen will be shown. Click on
the [Finish] button.
This completes the driver installation. Proceed to p. 18 to check
whether the driver has been correctly installed.