What to do if my Zortrax 3D Printers says '#111 Right hotend connection error'?
If your Zortrax 3D Printer shows '#111 Right hotend connection error', it means the right hotend thermistor has been disconnected or damaged. Replace the hotend module to fix this.
How to fix support/model material blocked within the cartridge of my zortrax Inventure?
To resolve the issue of support or model material being blocked within the cartridge of your Zortrax 3D Printer, follow these steps: * Remove the cartridge from the printer. * If material sticks out, cut the end flat. * If material doesn't stick out, pull it out using the feeder and cut the end flat. * Reload the material. If successful, the printer will confirm the loading process.
What to do if my zortrax Inventure say '#106 Please prepare the file using a newer Z-SUITE version'?
If your Zortrax 3D Printer shows '#106 Please prepare the file using a newer Z-SUITE version', it means your Z-SUITE software is outdated. To fix this, update the Z-SUITE to the latest version and prepare the file again.
What to do if my zortrax Inventure 3D Printers shows '#161 The model material cartridge is empty'?
If your Zortrax 3D Printer displays '#161 The model material cartridge is empty. Press any button when ready to load a new cartridge', it indicates that the model material cartridge has run out of material. You can resolve this by using a different or a new model material cartridge.
What to do if my Zortrax 3D Printers says '#112 Chamber thermistor connection error'?
If your Zortrax 3D Printer displays '#112 Chamber thermistor connection error', it means either the cable or the thermistor of the platform has been disconnected or damaged. Check if the cable under the platform is correctly installed and replace the platform cable.
Why does my zortrax Inventure 3D Printers says '#196 Insufficient cooling of the printer'?
If your Zortrax 3D Printer shows '#196 Insufficient cooling of the printer', it means the room temperature is too high, which may cause printing problems. Ensure the print room temperature is below 40° C/104° F.
What to do if my Zortrax 3D Printers says '#197 Insufficient cooling of the printer'?
If your Zortrax 3D Printer shows '#197 Insufficient cooling of the printer', it means the room temperature is too high. Ensure proper room temperature (below 40° C).
What to do if my Zortrax 3D Printers says '#141 Extruder Lower fan failure'?
If your Zortrax 3D Printer displays '#141 Extruder Lower fan failure', it indicates that the extruder lower fan is either disconnected or incorrectly installed. Check if the lower extruder fan is properly installed. If the problem persists, replace the lower extruder fan.
What to do if my Zortrax 3D Printers says '#138 Extruder cable disconnected'?
If your Zortrax 3D Printer displays '#138 Extruder cable disconnected', it means the extruder cable is either disconnected, incorrectly installed, or damaged. Check if the extruder cable is properly connected. If there is still a problem, replace the extruder cable.
What to do if my Zortrax 3D Printers says '#140 Extruder Upper fan failure'?
If your Zortrax 3D Printer shows '#140 Extruder Upper fan failure', the extruder upper fan is either disconnected or incorrectly installed. Check if the upper extruder fan is properly installed. If the issue persists, replace the upper extruder fan.
General| Nozzle width | 0.4 mm |
|---|---|
| Print technology | Layer Plastic Deposition Plus (LPD PLUS) |
| Printing material | ABS, Acrylonitrile Styrene Acrylate (ASA), Nylon, Polyethylene Terephthalate Glycol (PETG), Polylactic acid (PLA) |
| Layer thickness (max) | 0.3 mm |
| Layer thickness (min) | 0.15 mm |
| Number of print heads | 2 |
| Maximum build size (WxDxH) | 135 x 135 x 130 mm |
| Filament thickness supported | 1.75 mm |
| 3D scanner | No |
| Card reader integrated | Yes |
| Compatible memory cards | SD |
| Product color | Black |
| AC input voltage | 110 / 240 V |
| AC input frequency | 50 / 60 Hz |
| Power consumption (max) | 300 W |
| Storage temperature (T-T) | 0 - 35 °C |
| Operating temperature (T-T) | 15 - 30 °C |
To Next Page
