zortrax M Series Maintenance Guide

Suggested Part Replacement Time
The table shows approximate replacement time of components that are exposed to
natural wear and tear. In order to maintain the printer in good condition and to provide
the highest priting quality, it’s advisable to replace particular components after an
appropriate period of time indicated in the table.
NOTE! The lifespan of particular components highly depends on the type of
filaments you use most often.
Nozzle Hotend Perforated
Plate
Extruder
Cable
Heater and T
hermocouple
Extruder
Fans 40×40
Every 300
working hours
Every 400
working hours
Every 700
working hours
Every 500
working hours
Every 400
working hours
Every 500
working hours
Powered by TCPDF (www.tcpdf.org)

zortrax M Series Specifications

General

Brand	zortrax
Model	M Series
Category	3D Printers
Language	English