zortrax M Series Manual Platform Calibration

Distance Corrections
If the printer detects an incorrect distance, it will display instructions on what adjustments
should be made.
Once you’ve tightened/loosened the screws, push the knob and the printer will recheck
the distances.
When the proper distance for all the points on the plate is set, the printer will finish the
calibration and display the calibration results.
If calibration values reach results below -0.4 or above 0.4, you need to perform platform
maintenance.

zortrax M Series Specifications

General

Brand	zortrax
Model	M Series
Category	3D Printers
Language	English