zortrax M200 Quick Start Guide

1. Open the box, pull out the cushioning.
2. Cushioning from the front should be removed as the last one.
Now Zortrax M200 is ready to be taken out of the box.
3. Unbox Zortrax M200. Please use gloves.
4. Your Zortrax M200 is now unpacked. While lifting or moving
5. Zortrax M200 do not grab:
A. belts,
B. smooth rods,
C. extruder. Please use gloves.
UNPACKING
10

zortrax M200 Specifications

General

Build Volume	200 x 200 x 180 mm
Layer Resolution	90-400 microns
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	SD card
Software	Z-Suite
Operating System	Windows, macOS
Frame	Aluminum
Printing Speed	up to 100 mm/s
Heated Bed	Yes
Bed Temperature	up to 110°C
Nozzle Temperature	up to 380°C
Power Consumption	300 W
Technology	FDM
Supported Materials	Z-ABS, Z-ULTRAT, Z-HIPS, Z-GLASS, Z-PETG, Z-ESD
Power Supply	100-240 V, 50/60 Hz
Dimensions	345 x 360 x 430 mm
Weight	13 kg